Wir versenden auch ins Ausland. Derzeit haben wir die Preise dazu noch nicht erfasst. Für ein individuelles Angebot ins Ausland können Sie uns gerne unter support@magglance.com kontaktieren.
Ihr Dokument wurde erfolgreich gespeichert.
Möchten Sie wirklich die im Warenkorb enthaltenen Artikel zahlungspflichtig bestellen?
Das PDF-Dokument, das Sie importiert haben, hat nicht das optimale Format. Zur Sicherstellung eines optimalen Druckergebnisses sollte das PDF mit Beschnittrand (3 mm Beschnitt zu jeder Seite) angelegt angelegt werden. Falls Sie dieses Magazin trotzdem drucken möchten, vergrößern wir die Seiten automatisch um den Beschnittrand, so dass 3 mm an jeder Seite abgeschnitten werden.
Möchten Sie das Magazin trotzdem drucken?
Ihre Bestellung war erfolgreich. Sie haben per Email eine Rechnung bekommen. Alternativ können Sie sich die Rechnung auch in Ihrer Bestellübersicht anschauen.
Ihr eMagazin ist nun auch in Ihrem internen Profil in der Magazinübersicht sichtbar.
Die Lieferdauer ist abhängig von der Auftragsgröße und der Auftragslage. In der Regel werden die unten genannten Lieferzeiten eingehalten, bitte haben Sie jedoch Verständnis dafür, dass es ggf. zu Abweichungen kommen kann. Wir empfehlen Ihnen daher immer genügend Puffer einzuplanen.
Versandart
Anzahl Werktage
normal (?)
ca. 5-9
schnell (?)
ca. 2-4
blitzschnell (?)
ca. 1-3
Den genauen Liefertermin können wir Ihnen bei Bedarf nach Auftragseingang mitteilen. Insbesondere bei größeren Auflagen kann es zu den oben genannten Angaben zu Abweichungen kommen. Schreibe Sie uns dazu einfach eine E-Mail mit Ihrer Rechnungsnummer an support@magglance.com
Der Versand außerhalb von Deutschland kann je nach Land etwas länger dauern. Kontaktieren Sie uns dazu einfach.
Um das Magazin kaufen zu können müssen Sie eingeloggt sein. Melden Sie sich jetzt an oder registrieren Sie sich kostenlos.
Binden Sie Ihre erstellten Magazine in Ihre Internetseite ein. Kopieren Sie dazu das unten stehende Skript und fügen Sie es in Ihren HTML-Code ein:
Everything You Should Know About Fishing Rod
1. About the strength of the fishing rod.
The main effect of the fishing rod is achieved by the bending arc curve of the fishing rod, so the fishing rod cannot bend a certain section, which is easy to break. Many fishermen worry about the tip section being too thin and not strong enough when purchasing fishing rods, so they conduct bending experiments on the tip section, which is unscientific. Some fishermen also worry that their strength is not enough. This is not to worry, because the fishing rod needs to be stressed as a whole during the fishing process, not just a certain section. Therefore, to judge the strength of the fishing rod, an overall experiment must be performed. The method can be: one person holds the rear end of the rod body, the other person holds the thinnest end of the rod body, and the person holding the rear end vigorously lifts the rod body upward, constantly or bending the arc.
View more:
https://www.trade-global.com/fishing-rods.html
2. Regarding anti-rust and anti-corrosion.
Fishing rods will often get wet during use, especially with the high salt content of seawater, and many stainless steel accessories will also rust due to material or use problems. After the fishing rod is used, open the thread of the tailpiece, wash the sand, salt, and other dirt in clean water back and forth, and then use a dry rag to clean the surface moisture, and finally place it in a cool and ventilated environment to dry. Pay special attention to the fact that the fishing rod cannot be placed in a high-temperature and airtight place such as the trunk of a car for a long time.
3. The problem of damage to the guiding eye of the reduced rod.
When many fishermen use the retracted rod, they often hold the handle and shake it hard, throw out the front section and then straighten the guiding eye, which is an incorrect operation method. It should be to clamp the handle section of the fishing rod in the armpit, then pull out the -1, -2, -3, and other sections in order, and twist the rod section outward with a little force. The guide eyes of a section are aligned in the direction. After the whole rod is completely pulled out, check whether all the guide eyes are in a straight line. If there are skewed guide eyes, you can straighten them according to the above method. When the used fishing rod is retracting the rod section, it can be gradually retracted from the last section to the previous section according to the above steps. In short, there is a trick to remember: both pulling out and retracting need to twist the rod body by hand, not with brute force.